Concrete cutting in Concord NC - straight, clean cuts right where you need them
Scanned first, marked square, cut clean
Concrete cutting lets you run a new drain, open a doorway or pull out a bad section of slab without busting up the rest. In Concord and the cities around it, I come out, look at what's there and tell you straight whether cutting is the right call.
Concrete cutting leaves an edge you can build on
Concrete cutting gives you a clean, straight edge in a slab that's already there, for a drain trench, a doorway, or a bad section coming out before a new concrete driveway goes in.
The price moves with how thick the slab is, how much steel is inside and whether the pieces leave with us. The schedule turns on access and what the scan finds. Your written estimate spells out what's included and what isn't.
Best for
- Adding a drain or pipe
- New doorway in concrete
- Replacing a driveway section
- Basement plumbing changes
Edges you can pour against
A sawn edge is clean and square, so new concrete butts up tight to the old and the seam reads as a straight line instead of a patch.
Less damage to what stays
The blade only goes where we've marked it, so the slab you're keeping takes far less of the shaking that hammering a section loose sends through it.
Room for new pipes and wiring
A trench or a cored hole lets your plumber or electrician run new lines through concrete that's already in place, without tearing out the whole floor.
Less dust in the air
Water on the blade keeps the dust down and the blade cool, which matters most when we're cutting near your house, your cars or your neighbors.
Concrete cutting that leaves the slab around it sound
- I come out to look at the job and write the estimate myself, and I'm on site running our own crew when the saw starts.
- We're licensed and fully insured. On bigger projects, state law requires a licensed general contractor once the total cost hits $40,000, so ask whoever runs yours.
- I learned this work on my father's crews around Concord and started this business in 2017. Call (980) 255-3818 and I'll come mark out your cuts.
What we can cut for you
I'll look at what you're cutting and what goes in after, then tell you the cleanest way to get there, including when a cut isn't worth it and a new slab makes more sense.
Trench cuts
Two parallel cuts across a floor or slab so a new drain, water line or conduit can be buried and patched over.
Wall openings
A doorway, window or egress opening cut through a concrete wall, laid out square so the frame fits without shimming.
Round holes
Cored holes for pipes, vents and drains when you need a tidy round opening through a floor or wall and nothing more.
Section removal
A cracked or sunken panel cut out and hauled off so the rest stays, often ahead of a new concrete patio.
Tell us what needs cutting
Send the surface, cut lengths or hole sizes, a few photos, and whether removal's needed. We reply within one business day to set up a free on-site estimate, no obligation.
Concrete cutting questions we hear
What kind of saw does my concrete cutting job need?
A flat saw handles floors, driveways, sidewalks and trench cuts, and a track-mounted wall saw handles walls and openings that stand upright. Round holes for pipes, conduit and drains get a diamond core drill. If an opening goes through concrete that helps hold up the house, one field guide says an engineer controls it.
How much does concrete cutting cost in Concord, NC?
Professional saw cutting usually runs about $4 to $25 per linear foot across the US, and reinforced or thicker slabs cost more per foot. Small jobs are often priced mostly by the charge to get a crew and saw out. Breaking and hauling can cost more than the sawing, so our quote lists sawing and removal as separate lines.
Why do you scan a concrete slab before cutting it?
Scanning shows the rebar, the steel bars that hold a slab together, plus any tensioned cables and live conduit before the blade finds them. One cutting field guide makes it the first rule, because hitting a tensioned cable or live conduit can be deadly, so we scan the slab before the saw touches it.
Who handles building permits for concrete work in Concord?
Cabarrus County's Construction Standards Division issues building permits countywide, and the city and county review Concord applications together. Driveway permit applications go to the city Engineering Department with plans, plus an N.C. DOT form for access onto a state street. When a job needs a permit, we handle the application and tell you which office reviews it.
Is it safe to cut concrete inside a basement?
It can be, with the right saw, because gas-powered saws build up carbon monoxide indoors, and OSHA has documented workers dying in a basement while running a gas wet saw. Before any cut in a basement or other closed space, we tell you which saw we'll run and why.
Where does the water from concrete cutting go in Concord?
That's worth settling before the saw starts, because the City of Concord prohibits illicit discharges into its storm drain system. One industry sawing specification says collecting and disposing of slurry, the wet sludge cutting leaves behind, must be agreed with the owner before work begins, so ask us about it at the estimate.
Other concrete work we do
Concrete driveway building
When a cut-out section is the start of a new driveway, we pour it on a dug-out, packed base.
Explore Concrete driveway buildingConcrete patio construction
Once a cracked patio panel is cut away, we can pour a new patio sloped to drain away from your house.
Explore Concrete patio construction