Concrete Floor Installation in Concord NC - a slab ready for what goes on top
Packed base, planned joints, patient cure
Quality Concord Concrete does concrete floor installation in Concord, NC and the cities around it, for additions, workshops, sunrooms and outbuildings. Before I plan one, I ask what's going on top, because that decides the moisture barrier under the slab and how long you'll wait before flooring goes down.
Why a concrete floor is worth getting right
A concrete floor is a slab poured on prepared ground inside the walls. Size, reinforcement, the moisture barrier and site access move the price, and the schedule turns on the cure, the wait while the slab hardens, and the flooring going on top.
Your written estimate lists what's in and what isn't. If the budget's tight, trim the finish before the base, because the base is hidden on day one and can't be redone later.
Best for
- Room additions
- Workshops and outbuildings
- Sunrooms and enclosed porches
- Floors getting tile or wood
Stands up to hard use
Rolling carts, dropped tools and heavy shelving don't faze concrete, so it suits a shop or a storage building better than a framed floor does.
No bounce, no creak
A slab on packed ground doesn't flex underfoot the way a framed floor can, so tile and heavy equipment sit on something solid.
Doesn't mind water
A spill, a leak or a wet dog won't rot concrete, which is why it's the usual pick for mudrooms, shops and rooms with an outside door.
Works bare or covered
You can leave the slab as your finished floor, or lay tile, vinyl or a coating over it once it's ready for one.
Base, pour and joints behind a lasting concrete floor
- We strip topsoil and soft spots and pack the subgrade, the dirt and fill the slab sits on, because ground that's just raked level settles later.
- I come out to look at the job and write the estimate, then our own crew forms, pours and finishes the floor with me on site running it.
- We're licensed and fully insured. We pour before the midday heat and cut control joints, grooves that give cracks a planned line, on time.
Finishes and choices for your concrete floor
I'll look at the room with you, ask how you'll use it and tell you straight which of these is worth the money for your job and which isn't.
Smooth troweled finish
Troweled slick and dense, it suits a floor you'll tile, coat or seal, and it sweeps clean in a shop.
Broom finish
Dragging a broom over the wet surface leaves a light, gritty texture for grip, which suits a mudroom or a floor that gets wet.
Sealed bare concrete
Leaving the slab as your finished floor with a clear sealer suits a workshop or storage building where looks come second.
Ready for flooring
When tile, vinyl or wood is going down, we plan the moisture barrier and the wait before your installer starts.
Tell us about your floor
Send the floor's size, how you'll use it and what flooring goes on top. We reply within one business day to set up a free on-site estimate, with no obligation.
Concrete floor questions from Concord
Will my new concrete floor crack?
Probably a little, because no one can keep concrete from cracking entirely. Joints cut in the right places keep most cracks on those planned lines, and wire mesh or rebar, steel set at the right depth in the slab, won't stop cracks but helps keep them narrow. Ask any crew how they'll lay out the joints.
Does a concrete floor need a vapor barrier under it?
A plastic vapor barrier, a sheet that keeps ground moisture from coming up, gives flooring and coatings the most protection when it sits right against the slab. That same spot greatly raises the chance of cracking, so the choice comes down to what's going on top and how much it needs that protection.
When can flooring go over a new concrete slab?
Often not right away, because in the months after the pour a slab dries and can curl slightly at the joints, which can conflict with some floor coverings. That curl is normal. We work the wait into your schedule from the start, so your flooring installer isn't booked too early.
What does a concrete floor cost around Concord, NC?
A concrete slab in the Charlotte area usually costs about $6 to $11 per square foot, according to one local cost guide, and that's the market's rate, not our quote. The same guide prices reinforced slabs higher per square foot than plain pads. Your own number comes from the estimate, once I've seen the room.
Who handles building permits for a concrete floor in Concord?
Cabarrus County's building office handles permits and inspections across the county, and its permit list names additions and remodels but not concrete floors on their own, so ask it about yours. In Concord, one application covers the city's zoning review and the county's building review. If yours needs a permit, we handle the application and scheduling and tell you which office is reviewing it.
Does a concrete contractor need a license in North Carolina?
A general contractor must be licensed by state law when the total project cost is $40,000 or higher, according to the NC Licensing Board for General Contractors. On a smaller job, ask whether the crew carries insurance and get the scope in writing, so you can compare bids line by line.
Other concrete work we do
Concrete pool decks
If your new room opens onto the pool, a concrete pool deck with a grip finish ties the two together.
Explore Concrete pool decksConcrete steps construction
When the new floor sits above the yard, concrete steps give the outside door a solid, even way in.
Explore Concrete steps construction