Garage floor concrete in Concord NC - the right fix for the slab you have
Checked first, then resurfaced, overlaid or replaced
Garage floor concrete means fixing a cracked, chipped or sunken garage floor by resurfacing it, pouring over it or replacing it. Quality Concord Concrete is based in Concord and works in the cities around it, and I start every job by checking whether your old slab has moved or is still solid.
Why garage floor concrete starts with the old slab
Most garage floor calls in Concord start with cracks, chipping or a section that's dropped. I check whether the slab has moved before quoting, because that decides between resurfacing, pouring over it or tearing it out.
Price and schedule mostly turn on which fix it is, how big the floor is and whether old concrete has to come out, and your written estimate spells out what's included. If the yard behind the garage is pushing in, that's retaining wall work first.
Best for
- Cracked or chipped floors
- Sunken or uneven slabs
- Worn, dusty surfaces
- Older garages
Water runs out the door
We check which way the floor falls before we pour, so water off wet tires heads out the door instead of back toward the house wall.
A top that stays hard
We pour early in the day rather than in midday heat, because a surface worked in the heat tends to turn weak and dusty later.
Grip underfoot
A broom finish, a light brushed texture pulled across the wet concrete, gives tires and shoes something to hold when the floor gets wet.
A straight answer
If your slab needs replacing, I'll say so up front rather than sell you a topping that won't hold up, so you can decide and move on.
What makes a new garage floor and its base last
- I come out to look at the floor and write the estimate myself, and on a replacement we dig out and pack the subgrade, the ground the slab sits on.
- Our own crew does the forming, pouring and finishing with me on site running it, a trade I learned on my father's crews around Concord.
- We're licensed and fully insured, so the crew working in your garage and around your house is covered from tear-out to cleanup.
Three fixes and a finish to choose from
I'll walk the floor with you, check each crack for movement and tell you which fix I'd pick and why. Then the written estimate lays it out so you can compare bids.
Resurfacing
Suits a solid floor where the damage is shallow but spread across most of the surface.
Pour over the old slab
Works only when the old slab is sound and stable enough to carry the added thickness and the weight of your cars.
Tear out and replace
The right call for wide cracking or a sunken section, since we start over with a dug-out, packed base.
Decorative finish
Adds color or texture to a new or sound floor, and our decorative concrete page shows the choices.
Tell us what your garage floor's doing
Send photos, and lay a straightedge across each crack to see if one side sits higher. We reply within one business day, and the on-site estimate is free with no obligation.
Garage floor questions we get
Should I resurface or replace my garage floor in Concord?
Replace it if the floor has wide cracking, has settled or has other serious structural damage, because that's usually the best long-term fix. Pouring over or resurfacing only makes sense when the old slab is sound and stable, so I check that first.
How long does a concrete overlay on a garage floor last?
An overlay often fails sooner than a new slab on properly prepared ground, typically after 10 to 15 years. It costs less up front, but an early failure means paying again, and thin overlays tend to crack or separate under heavy vehicles, so I'll tell you when one isn't worth it.
Who handles building permits for a garage floor in Concord, NC?
Cabarrus County handles building permits for construction in Concord, and one application gets both the city's zoning review and the county's building review. The city's permit list doesn't name garage floors, so ask before work starts. When a job needs a permit, we handle the application and scheduling and tell you which office reviews it.
When does a contractor need a state license in North Carolina?
The NC Licensing Board for General Contractors says a general contractor must be licensed by law when the total project cost is $40,000 or higher. On any job, ask each bidder whether they're licensed and insured, and get the answer in writing.
Will my new garage floor crack like the old one did?
It can, but a slab on well-prepared ground with control joints, planned weak lines cut so cracks follow them, cracks far less at random. Extra steel can't make up for a weak base, so the base is the last thing I'd cut from your budget, even before the finish.
Other work around your garage
Decorative concrete
When the floor is sound and you want color, pattern or texture added to the surface.
Explore Decorative concreteConcrete retaining walls
When a slope beside or behind the garage is shifting soil toward the slab or the walls.
Explore Concrete retaining walls